How to Take Apart Elite Security Knob Lock
Are you facing difficulties in removing the Elite Security Knob Lock from your door? Don’t worry; you’re not alone. Many people encounter this issue when trying to replace or repair their door locks. In this article, we will guide you through the process of taking apart the Elite Security Knob Lock step by step. By following these instructions, you’ll be able to disassemble the lock without causing any damage.
1. Gather the Necessary Tools
Before you start, make sure you have the following tools ready:
– Flathead screwdriver
– Phillips screwdriver
– Pliers (optional)
– Safety glasses
2. Remove the Knob Cover
1. Begin by locating the small set screw located on the back of the lock cylinder. Use a flathead screwdriver to remove it.
2. Once the set screw is out, gently pull the knob cover away from the lock cylinder. You may need to use a little force, but be careful not to damage the cover.
3. Set the knob cover aside for later use.
3. Disassemble the Lock Cylinder
1. Look for the cylinder retaining screw, which is usually located on the side of the lock cylinder. Use a Phillips screwdriver to remove it.
2. With the retaining screw out, the lock cylinder should slide out of the door. If it doesn’t, gently tap it with a hammer and screwdriver to release it.
3. Set the lock cylinder aside.
4. Remove the Lock Body
1. Locate the two mounting screws on the lock body. They are usually located on the top and bottom of the lock body. Use a Phillips screwdriver to remove them.
2. Once the mounting screws are out, the lock body should lift off the door. If it doesn’t, use pliers to gently pull it away from the door.
5. Reassemble the Lock
1. Place the lock body back onto the door and secure it with the mounting screws.
2. Insert the lock cylinder into the lock body and reattach the cylinder retaining screw.
3. Slide the knob cover back onto the lock cylinder and replace the set screw.
6. Test the Lock
1. Turn the key in the lock cylinder to ensure it is functioning correctly.
2. If the lock works as expected, you have successfully taken apart and reassembled the Elite Security Knob Lock.
By following these steps, you should now be able to take apart the Elite Security Knob Lock with ease. Remember to handle the tools and lock components with care to avoid any damage. If you encounter any issues during the process, don’t hesitate to consult a professional locksmith for assistance.
